Blog

Introduction Scrubber towers, also known as gas scrubbers or scrubbers, are essential components in various industrial processes. They are designed to remove pollutants and harmful substances from industrial exhaust gases before they are released into the atmosphere. By using liquid solutions to “scrub” these gases, gas scrubbers effectively reduce emissions of pollutants such as sulfur […]

Introduction Absorption towers and regeneration towers are critical components in various industrial processes, especially in gas treatment and purification. Absorption towers are primarily used to capture and remove specific gases from a gas stream by dissolving them into a liquid solvent. In contrast, regeneration towers are employed to recover and reuse the absorbed gases or […]

Carbon dioxide gas after the initial purification due to scrubbing treatment contains more water gas, must first pass through the liquid-gas separator to remove liquid moisture; and then into the compressor compression pressure rises to 1.8Mpa or so, carbon dioxide gas compression temperature is higher for 60-90 ℃ need to be cooled, the after-cooler using […]

Including refrigeration unit and evaporation condenser, after purification of the gas under a certain pressure can only be liquefied under specific temperature conditions, the refrigeration unit is to provide enough cold for the liquefaction of carbon dioxide, in the evaporation condenser refrigerant and carbon dioxide gas heat exchange, carbon dioxide down to a certain temperature […]

The single set of adsorption drying system mainly consists of two parallel adsorption towers, drying tower and external electric heating composition and high pressure direct supply device. The compressed gas firstly enters into the adsorption tower, which is equipped with activated carbon packing for adsorption of odor in carbon dioxide gas, and the regeneration of […]

1